Search Results

Counterfeit parts prevention is integral to an effective obsolescence management plan, and the focus of anti-counterfeit standards – including Counterfeit Avoidance Standard (AS5553) and Counterfeit Detection Standard (AS6081) – from SAE International in Warrendale, Pa. SAE International officials are bringing the anti-counterfeit discussion and sharing best practices, which include adherence to critical standards, to the Future of Obsolescence Management (FOM) event on October 10 and 11 in Washington.

Safran engineers tested and validated several operating modes of the company's distributed hybrid electric propulsion system during this first series of tests, with the electric motors powered only by batteries or by a combination of batteries and turbo-generator.

Astronauts on the International Space Station (ISS) have launched RemoveDEBRIS, the first satellite with space debris-removal capabilities and the largest satellite ever deployed from the ISS. RemoveDEBRIS, a low Earth orbit test bed for determining the efficacy of active debris removal (ADR) systems, is a multinational effort involving space agencies, aerospace experts, and technologies from throughout Europe, Asia, Africa, and the U.S.

The first Airbus BelugaXL has rolled out of the paint shop, sporting a special, beluga whale-inspired livery selected by Airbus employees.

AKG of America’s research and development center at its Mebane, North Carolina, facility hosted a grand opening in February that features a new water/glycol thermal shock test stand for product validation.

In contrast to the stiff, rigid wings found on most commercial aircraft, flexible wing technology is considered essential to next generation, fuel efficient aircraft. However, flexible wings are susceptible to “flutter,” or highly destructive aeroelastic instability. To better understand and mitigate flutter, engineers at NASA’s Armstrong Flight Research Center (AFRC) equipped the X-56 with fiber optic sensing (FOS) technology.

Lockheed Martin Corporation successfully completed development and testing for the heatshield that will protect NASA Jet Propulsion Laboratory Mars 2020 rover during its descent to the Martian surface. After completing the flight hardware structure, Lockheed Martin tested the heatshield’s physical integrity by exposing it to ‘flight-like’ thermal conditions.

Goodfellow’s process involves breaking methane gas – a very potent greenhouse gas – into hydrogen and elemental carbon atoms in a plasma reactor. The carbon atoms recombine into graphene sheets in the hydrogen atmosphere.

Collins Aerospace, a subsidiary of United Technologies Corporation (UTC), has laid out its plans for what is calling “The Grid” – an 25,000-square-foot advanced electric power systems laboratory for designing and testing next-generation, more-electric aircraft technologies for commercial, military, and business aviation.

Future airspace will be filled with unmanned aircraft systems (UAS) or drones, commercial aircraft, helicopters, and more. Several prototypes are currently targeting urban air mobility (UAM) platforms, such as air taxis, and revolutionary aircraft models like next-generation commercial supersonic aircraft. Add to this autonomous swarm technologies, enabling manned-unmanned teaming, and systems for future vertical lift and it’s clear that the technology wave can easily become overwhelming.

Stratolaunch Systems Corp., founded by Paul G. Allen, in Seattle, Washington, has completed the first flight of the Stratolaunch, the world’s largest all-composite aircraft, with a dual-fuselage design and wingspan greater than the length of an American football field. The Stratolaunch aircraft took flight on April 13 at 0658 PDT from the Mojave Air & Space Port in Mojave, California; achieved a maximum speed of 189 miles per hour; and flew for 2.5 hours over the Mojave Desert at altitudes up to 17,000 feet. 

According to Airbus, the CityAirbus UAM vehicle – or “air taxi” – will initially be operated by a pilot for certification and market entry purposes; however, the aircraft is designed for fully autonomous flight once regulations are established.

Continental Aerospace Technologies is partnering with Diamond Aircraft Industries GmbH of Austria to provide a new powerplant for the DA50 general aviation aircraft. Continental also recently expanded its portfolio with a “cash and in-kind contribution” investment in Ampaire Inc., an electric aircraft and propulsion company.

“We originally thought solar cells would be standard on the airplane’s wings,” says George E. Bye, founder and CEO of Bye Aerospace Bye. “However, with eFlyer’s primary markets being flight training and air taxi services, it makes more sense to make the price of the airplane as reasonable as possible.”

The Kilopower project is a near-term technology effort to develop preliminary concepts and technologies for an affordable fission power system aimed at future space exploration missions. According to project officials, the experiments should conclude with a 28-hour, full-power steady-state test of the “agnostic” power system in late March.

The Global 7500 business jet from Bombardier Inc. in Montreal appears to be on the fast track to entering service, thanks in large part to high-tech engineering design, simulation, and test tools. Bombardier engineers and officials are crediting the program’s extensive use of proven engineering tools, digital simulation, innovative ground testing systems for helping to ensure: a mature aircraft at the start of flight testing, an efficient flight validation program, test aircraft that exceed original performance goals, and completion of one lifetime of simulated flights, which exceeds the requirements at time of certification.

Jun 13, 2018 - The Aerospace Material Specification committee on Additive Manufacturing (AMS-AM) at SAE International in Warrendale, Pennsylvania, has released its first suite of Aerospace Material Specifications (AMS) additive manufacturing materials and process specifications. The new aerospace technical standards, now available from SAE, support the certification of critical aircraft and spacecraft parts, providing both a framework to protect the integrity of material property data and traceability within the aerospace supply chain.

The 3D printing materials market will experience high double-digit growth in the aerospace industry through 2024, as manufacturers of aircraft and spacecraft vehicles and components increasingly adopt and reap the benefits of additive manufacturing, market analysts at Frost & Sullivan in Mountain View, California, predict.

Engineers from the Air Force Research Laboratory’s (AFRL’s) Manufacturing Technologies Division successfully demonstrated the capabilities of a new multi-purpose maintenance and manufacturing robot at the Southwest Research Institute in San Antonio.

Aerospace systems, subsystems, and components must continue to operate as intended when exposed to fire, rather than going up in flames and ceasing to work altogether. Fire and flammability testing is an all-important prerequisite to airworthiness, and the focus of a new technical standards committee that SAE International in Warrendale, Pennsylvania, is forming in response to a request from Federal Aviation Administration (FAA) officials in Washington.